You’ll get a compact, brushless 20V edger that delivers consistent blade speed and cleaner cuts than typical cordless models, though it won’t replace gas for heavy trenching. The steel blade and single-lever depth control give predictable edges and modest trenching, while dual wheels and ergonomic grips stabilize operation. Runtime is limited by the PowerShare 20V pack, so plan spares for larger jobs. Keep going to see detailed performance, handling, and battery trade-offs.
Some Key Takeaways
- Brushless motor provides about 25% more torque for steadier blade speed and consistent cuts compared with typical cordless edgers.
- Steel blade holds edge well, enabling clean hardscape edging and predictable trenching with single-lever depth control.
- Dual-wheel layout and adjustable auxiliary handle deliver stable tracking, reduced fatigue, and straightforward two-stage safety lockout.
- Uses 20V PowerShare battery—convenient across tools but offers modest runtime for heavy or prolonged edging tasks.
- Best for homeowners and light-duty contractors needing portable, precise edging; not a replacement for heavy gas-powered equipment.
Quick Verdict: Is the WORX Nitro 20V WG898 Worth Buying?
While it won’t replace heavy-duty gas equipment for continuous, professional trenching, the WORX Nitro 20V WG898 is worth buying if you need a cordless, precision edger that balances power and convenience. You’ll get pro-level brushless efficiency and a steel blade that yields consistent cuts with minimal fuss. Expect controlled depth adjustment and stable handling for repeatable results. You should plan battery maintenance to preserve runtime and check warranty coverage to mitigate defects; both matter for long-term value. If you’re part of a community that values reliable, shareable tools, this unit fits as a practical, accountable choice. For homeowners who enjoy their outdoor spaces, consider pairing it with mower jack gear for safer, easier maintenance.
How the WG898 Performs: Power, Cutting Quality, and Trenching Results
Because the WG898 uses a brushless motor, you get noticeably stronger, more consistent power and longer runtime than you’d expect from typical cordless edgers. You’ll notice 25% more torque delivering steady blade speed under load, so cutting quality stays uniform across thicker turf and compacted edges. The steel blade shows good blade durability—sharpness holds through repeated passes—and the single-lever depth control makes trenching predictable to set up. In heavier soil compaction you may need slower progress and a second pass, but the tool maintains rpm and battery life well. Overall, it’s pro-capable with sensible limits you’ll accept. Worx pairs this with a product line focused on electric hedge trimmers and outdoor power tools geared to homeowners who enjoy their yards.
Controls, Handling, and Stability During Real-World Use
Get a solid feel from the moment you pick it up: the dual-wheel layout and adjustable auxiliary handle let you set a stable, balanced stance that minimizes wobble and keeps the blade tracking true. You’ll notice the ergonomic grip positions your hands for torque control, reducing fatigue during longer runs. Controls are straightforward; the two-stage lockout is positive and unambiguous, preventing accidental starts without fuss. Vibration dampening is effective but not perfect—high-RPM cuts transmit some buzz through the shaft. Overall handling rewards deliberate posture and setup; when you belong to a practical user group, its predictability matters. This model fits well into a lineup of lawn tools designed for homeowners who enjoy their outdoor spaces and prefer cordless convenience.
Battery System, Runtime, and Compatibility With PowerShare Batteries
When you run the WG898, its 20V PowerShare battery gives a clear trade-off between convenience and runtime: it’s light and quick to swap, but expect modest continuous cutting time on heavy-duty edging or trenching. You’ll appreciate PowerShare’s ecosystem—one battery powers many tools—yet you should monitor battery health: shallow discharges and frequent charging cycles speed runtime degradation. For predictable jobs, carry spare packs and rotate use to balance charging cycles. Note reduced output in cold weather performance; capacity falls and cut time shortens. Overall, compatibility is strong, but plan batteries and storage to preserve long-term performance. Consider how the PowerShare ecosystem supports multiple yard tools with interchangeable batteries to simplify equipment management.
Who Should Buy the WG898 and Which Jobs It’s Best Suited For
If you need a lightweight, battery-powered edger that balances precise edging with occasional trenching, the WG898 fits that role for homeowners and pros doing moderate-duty tasks. You’ll appreciate its brushless motor efficiency and PowerShare compatibility if you’re a homeowner with tight budgets who wants pro-level results without multiple platforms. Lawn care enthusiasts will like clean hardscape edges and simple depth control. Small property contractors can use it for quick jobs where portability beats raw power. Light duty trenching specialists will find it adequate for shallow utility runs. It’s not for heavy commercial cycles or continuous, deep excavation work. Gardeners who frequently maintain lawns will also benefit from accessories designed for garden cart use.
Some Questions Answered
Does the WG898 Include a Blade Guard or Safety Shield?
Yes — the WG898 includes a blade protection feature. You’ll get a built-in guard that shields the cutting edge and helps prevent debris kickback, promoting user safety during edging and trenching. You’ll appreciate the durable steel blade paired with that guard for controlled cuts; the integrated edging guide and dual-wheel stability further reduce risk. Rely on those protections for consistent, safer results across your landscape tasks.
What Is the Product’s Weight for Single-Handed Use?
The tool weighs about 12.3 pounds, so you won’t comfortably wield it single-handed for long tasks. With lightweight ergonomics and grip comfort, you can manage brief maneuvers, but balance and torque favor two-handed use for precision edging and trenching. Expect reduced fatigue only during short bursts; sustained use will demand the auxiliary handle. Critically evaluate your stamina and job length before assuming single-handed operation is practical or safe.
Are Replacement Blades or Parts Readily Available?
Yes — replacement blades and parts are generally available, but you’ll want to verify fit. Check manufacturer and aftermarket blades listings and compatibility charts before buying; not all third-party blades match the steel blade profile or arbor size. You’ll find OEM parts and common aftermarket options through major retailers and specialty suppliers. Stay critical: confirm specs, return policies, and warranty impacts so your community of users keeps tools safe and reliable.
Does It Come With a Warranty and How Long Is It?
Yes — it includes a manufacturer warranty; the warranty duration is typically 3 years, though you should verify your region. You’ll get service coverage for defects in materials and workmanship, but normal wear (blades, batteries) and misuse aren’t covered. Register the product to streamline claims, keep receipts, and contact WORX support for authorized repairs or parts. You’ll feel supported, but inspect terms closely to avoid surprises.
Can the Depth Lever Be Locked During Transport?
Yes — you can lock the depth lever for transport. The edger uses a locking mechanism that secures the single-lever depth adjustment, improving transport safety and preventing accidental movement. You’ll appreciate the stable setup when loading or storing the tool; it’s designed for pro-level handling and reduces the risk of blade exposure. Trust the feature to keep your crew and equipment safer while sharing gear and responsibilities.
